Comment:	LoRa APRS RX iGate im Test
Last status:	https://github.com/richonguzman/LoRa_APRS_iGate 2025.03.20
Location:	51°31.13' N 13°58.67' E - ตำแหน่ง JO61XM74IM - show map 1.8 km ตะวันตกเฉียงใต้ bearing 247° มาจาก Senftenberg, Brandenburg, Germany [?] 6.5 km ตะวันออก bearing 88° มาจาก Schipkau, Brandenburg, Germany 113.1 km ตะวันออก bearing 79° มาจาก Leipzig, Direktionsbezirk Leipzig, Saxony, Germany 118.3 km ใต้ bearing 161° มาจาก Berlin, Berlin, Germany
Last position:	2025-06-16 21:20:08 UTC (2m15s ago) 2025-06-16 23:20:08 CEST เวลาท้องถิ่น Senftenberg, Germany [?]
Device:	Ricardo, CA2RXU: ESP32 LoRa iGate (igate)
Last path:	DL1LU-10>APLRG1 via TCPIP*,qAC,T2LAUSITZ
Positions stored:	2
Other SSIDs:	DL1LU DL1LU-D DL1LU-5
APRS igate – Statistics for 2025-06:
Stations heard directly:	2 on radio path – show map
Last heard a station directly:	2025-06-16 21:14:18 UTC (8m5s ago)
Position packets heard directly:	148 on radio path
Position packets sent to APRS-IS:	160 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.