Comment:	APRS iGate 2m on Rpi
Last status:	Running on Raspberry Pi with RTL_FM
Location:	52°24.29' N 12°54.77' E - ตำแหน่ง JO62KJ97MD - show map 3.2 km ตะวันตกเฉียงเหนือ bearing 334° มาจาก Werder, Brandenburg, Germany [?] 8.1 km ตะวันออกเฉียงใต้ bearing 148° มาจาก Ketzin, Brandenburg, Germany 36.2 km ตะวันตก bearing 249° มาจาก Berlin, Berlin, Germany 124.1 km เหนือ bearing 17° มาจาก Leipzig, Direktionsbezirk Leipzig, Saxony, Germany
Last position:	2025-10-01 16:40:27 UTC (23s ago) 2025-10-01 18:40:27 CEST เวลาท้องถิ่น Werder, Germany [?]
Device:	WB2OSZ: DireWolf
Last path:	DG1RWA-11>APDW18 via qAO,DG1RWA-11
Positions stored:	8
Other SSIDs:	DG1RWA-10 DG1RWA-9 DG1RWA-7 DG1RWA-12 DG1RWA DG1RWA-N DG1RWA-Y
APRS igate – Statistics for 2025-10:
Stations heard directly:	1 on radio path – show map
Last heard a station directly:	2025-10-01 11:54:59 UTC (4h45m ago)
Position packets heard directly:	2 on radio path
Position packets sent to APRS-IS:	4 – show map

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.