Comment:	TESTING BTECH 6x2
Location:	40°24.50' N 104°50.82' W - ตำแหน่ง DN70NJ87IX - show map 9.0 km ตะวันออกเฉียงใต้ bearing 149° มาจาก Windsor, Weld County, Colorado, United States [?] 12.9 km ใต้ bearing 178° มาจาก Severance, Weld County, Colorado, United States 75.3 km เหนือ bearing 9° มาจาก Denver, Denver County, Colorado, United States 75.5 km เหนือ bearing 359° มาจาก Aurora, Adams County, Colorado, United States
Last position:	2025-06-24 03:59:19 UTC (2d 22h40m ago) 2025-06-23 21:59:19 MDT เวลาท้องถิ่น Windsor, United States [?]
Altitude:	1365 m
Course:	187°
ความเร็ว:	0 km/h
Device:	BTECH
Last path:	WY0RS-3>APBT62-1 via W0UPS-15,WIDE1*,WIDE2-1,qAR,KC0SIQ-3
Positions stored:	4
Other SSIDs:	WY0RS-9 WY0RS-1 WY0RS-2 WY0RS-1 WY0RS-4 WY0RS WY0RS-2

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.